Scan your Computer to find RAM type
(Only for Windows XP OS with IE Browsers)
You
have purchased a large collection of RAM modules - SIMMs and
DIMMs, but you have no idea of how to identify the memory capacity
in megabytes (MB) of the individual modules, and you want to
know if there is any way to determine the size of a module other
than by installing it on a motherboard in a computer that supports
that type of RAM.
It
is possible to identify the chips by part number. You have
to identify the size of each the chips on a module, and then multiply
the size by the number of chips on the module to determine its
memory capacity.
Different
RAM manufacturers have developed their own methods of identification,
so it is has become difficult to identify the chips without looking
up the exact part number on a website that provides the information.
Unless
they have been remarked by unscrupulous dealers that are selling
substandard modules not passed for use in a computer as computer-quality,
all of the chips on a particular module will have the manufacturer's
name (or logo), and a part number printed on them.
For example, a 30-pin SIMM module with nine chips on the module,
could have the part number - KM41C4000AJ-8. Drop the AJ-8
(the first letter is usually the quality - A, B, C, etc.),
then use KM41C4000 to conduct a Google
search. You should be provided with links to many sites that provide
information about part numbers. One of them is http://www.memoryusa.com/guide.html.
The
KM indicates parts made by Samsung. The 41
indicates that it is a 1Mbit x 4 part. This means that the chip
holds 4Mbits. Eight of the nine chips hold memory, so this is
a 8 x 4Mbit, or 32Mbit module. There are eight bits to a byte,
therefore this is an 4MB module. The ninth chip is there to add
parity. This was used as a means of checking for memory errors
that is no longer used.
For
a 168-pin DIMM module that has eight chips (no parity chip), and
the part number - TMS626812DGE-12A - you would use TMS626812
to search for information on it.
Each
chip is a 2Mbit x 8 (16Mbit) SDRAM chip. There are eight chips,
so this is a 16MB SDRAM module, which is slow compared to the
fastest speed that SDRAM modules reached. The 12 in the
part number indicates that the module has a maximum frequency
(speed) of 66MHz. SDRAM modules, now superseded by DDR and Rambus
RAM, reached a maximum speed of 133MHz.
Decode
RAM chip part numbers
At
the following site, you just enter the RAM chip part numbers to
find out the manufacturer and specifications. -
16-bit
Rambus RDRAM memory (184 pins) This type of RAM is increasing in popularity. These modules
operate at up to 533Mhz speed compared to 133Mhz for SDRAM. Most
Pentium 4 systems support RDRAM modules for top performance.
32-bit
Rambus RDRAM memory (232 pins) 32-bit Rambus modules provides two independent memory channels,
which means there is no requirement to install these modules in
pairs of two.
RIMM3200 modules provide a memory bandwidth of 3,2Gb/s, RIMM4200
provides 4,2Gb/s and RIMM4800 provides an unparalleled transfer
rate of 4,8Gb/s.